Home > Heat Management / Exhaust Wrap/ Fire Sleeve
Sort By:
Page of 1
DEI Speed Tape / Racers Tape Black 2" x90 '
List Price: $9.99
Our Price: $8.99
Sale Price: $8.99
Savings: $1.00
DEI Stainless Locking Tie Straps 14" 4 pak
List Price: $14.99
Our Price: $11.49
Sale Price: $11.49
Savings: $3.50
DEI HT Silicone Coating Black
List Price: $13.99
Our Price: $12.49
Sale Price: $12.49
Savings: $1.50
DEI's Speed Tape has multiple uses including race applications,
temporary damage repairs and taping body seams to name a few. Speed Tape
tears straight and easy every time and is available in eight colors as
well as the popular checker-board

Locking Ties are perfect for securing wrap to pipes with it's self-locking design. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight.

  • Constructed of high grade 304 stainless steel
  • Capable of withstanding heat in excess of 2500°F
  • Strong – 100 lb tensile strength.

The High Temperature (HT) Silicone Coating provides lasting protection for any hot surface up to 1500 degrees. DEI recommend the use of this coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime. Don't limit the use to exhaust header wrap, this products works well on headers, blocks, starters and even on your grill at home. HT Silicone Coating is VOC (Volatile Organic Compounds) compliant in all 50 states.

Recommended for use with DEI non-Titanium exhaust wraps, HT Silicone Coating penetrates, seals and protects as well as helping to extend the lifespan of exhaust wrap.

  • Heat protection up to 1500°F
  • Penetrates, seals, protects and prolongs the lifespan of exhaust wrap
  • Protection from abrasions, hot oil spills & road grime
  • Many uses around the home and shop
  • 12 oz. cans.
DEI Quick Fix Tape Black-1"-x-12'
List Price: $15.99
Our Price: $13.99
Sale Price: $13.99
Savings: $2.00
DEI Quick Fix Tape Red 1"-x-12'
List Price: $15.99
Our Price: $13.99
Sale Price: $13.99
Savings: $2.00
DEI Heat Sheath 1/2" x 3'
List Price: $18.99
Our Price: $15.49
Sale Price: $15.49
Savings: $3.50

High performance Quick Fix Tape bonds to itself and is self-curing, forming a waterproof permanent seal. It's ideal for emergency hose repair, non-slip grip surface for tools, electrical splices and connections, serves as a temporary leak sealer, and does not leave a sticky residue after removal. Just a few of it's many uses.

Extruded from a special high performance grade silicone compound and engineered at 700psi tensile strength, Quick Fix Tape has insulating capabilities up to 8,000 volts and stretches to three times its length for a simple stretch-and-wrap application. The triangular profile of the tape (the center is thicker than the edges) provides a smooth edge when over lapping tape.

  • Available in 1 in. wide x 12 ft. rolls
  • Withstands temperatures from -60 degrees F (-54 C) to 500 degrees F (260 C)
  • Seal ends of hoses, bundle & wrap wires, weatherproof connections & more
  • Can be applied to wet surfaces
  • Corrosion & moisture resistant
  • Permanent air / liquid tight seal
  • Resists solvents, oils, fuel, acids & chemical spills.

High performance Quick Fix Tape bonds to itself and is self-curing, forming a waterproof permanent seal. It's ideal for emergency hose repair, non-slip grip surface for tools, electrical splices and connections, serves as a temporary leak sealer, and does not leave a sticky residue after removal. Just a few of it's many uses.

Extruded from a special high performance grade silicone compound and engineered at 700psi tensile strength, Quick Fix Tape has insulating capabilities up to 8,000 volts and stretches to three times its length for a simple stretch-and-wrap application. The triangular profile of the tape (the center is thicker than the edges) provides a smooth edge when over lapping tape.

  • Available in 1 in. wide x 12 ft. rolls
  • Withstands temperatures from -60 degrees F (-54 C) to 500 degrees F (260 C)
  • Seal ends of hoses, bundle & wrap wires, weatherproof connections & more
  • Can be applied to wet surfaces
  • Corrosion & moisture resistant
  • Permanent air / liquid tight seal
  • Resists solvents, oils, fuel, acids & chemical spills.

Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F.

  • Pliable for tight bends
  • Capable of withstanding 500°F direct / 2000°F radiant heat
  • Five popular diameters to choose from.
  • Trim to desired length.
DEI Stainless Locking Tie Straps 8 " 8 pak
List Price: $19.99
Our Price: $17.49
Sale Price: $17.49
Savings: $2.50
DEI Cool Tape 1 1/2 " x 15 '
List Price: $24.99
Our Price: $19.99
Sale Price: $19.99
Savings: $5.00
DEI Spark Plug Protect A Boot
List Price: $29.99
Our Price: $20.49
Sale Price: $20.49
Savings: $9.50

Locking Ties are perfect for securing wrap to pipes with it's self-locking design. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight.

  • Constructed of high grade 304 stainless steel
  • Capable of withstanding heat in excess of 2500°F
  • Strong – 100 lb tensile strength.

Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses.

  • Withstands direct heat up to 400°F and 2000°F radiant heat
  • Flexible and easy to apply
  • Strong self-adhesive backing
  • Use to secure panels, seal air boxes, wrap wiring & more.

Superior Protection for Extreme Angled Plug Wire Boots

DEI Protect-A-Boot Sleeves are uniquely designed to protect spark plug boots & wires against the harmful effects of direct and continuous heat - up to 1200°F. Continued exposure to extreme heat geneated from the engine block, exhaust manifold and headers can cause burn through, hardening or cracking of the spark plug wires and boots.

Like the original Protect-A-Boots product, the sleeves offer the same heat protection and double wall construction for added strength and durability, yet are designed to provide a universal fit for extreme angled, oversized, or rigid boots like ceramic ignition wire ends. The 1-1/4" I.D. at both ends and pliable construction allow the sleeves to fit multiple angled spark plug boots.

Otherwise the material is the same as DEI's popular Protect-A-Boots that are made from a tightly woven high temperature resistant glass fiber material.

  • Universal-fits multiple angled spark plug boots
  • 1-1/4” I.D. at both ends
  • Withstands up to 1200°F of direct heat
  • Glass fiber double-wall construction.
  • Fits nearly every type of boot!
DEI Cool Tube
List Price: $29.99
Our Price: $22.99
Sale Price: $22.99
Savings: $7.00
DEI Fire Sleeve 3/8' x 36"
List Price: $29.99
Our Price: $23.99
Sale Price: $23.99
Savings: $6.00
DEI Cell Saver Battery Kit
List Price: $29.99
Our Price: $26.99
Sale Price: $26.99
Savings: $3.00

Designed to provide the ultimate thermal protection from damaging heat, Cool Tube is designed to resist abrasions, contaminates, and condensation. Cool Tube is covered with a heat resistant glass fiber fabric and pre-slit lengthwise eliminating the need to disconnect cables, hoses, wires or brake lines for an easy installation.

  • Protects wires, cables, fuel and brake lines etc...
  • Withstands direct heat up to 500°F
  • Made from convoluted nylon 6 tubing-not plastic.
  • Reduces temperature by more than 40%

Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% silicone rubber, Fire Sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F.

Each kit includes a 16-inch length of black Fire Tape to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look.

  • NHRA Accepted Products
  • Insulates wiring, hoses, oil / brake / transmission lines & more
  • Use for bundling and protecting hoses, electrical wiring etc.
  • Withstands 500°F continuous / 2000°F intermittent heat
  • Burn protection during under hood repairs and maintenance
  • Includes a 16” length of Fire Tape.

Batteries are very susceptible to heat and vibration that could cause premature failure and hazardous leaks. Cell Saver is very capable of damping vibration and will absorb and neutralize any damaging leaky battery acids. Cell Saver is easy to install and excess material can be trimmed to accommodate batteries of most sizes and shapes.

  • Protects batteries from harmful radiant heat
  • Material withstands up to 2000°F radiant heat
  • Traps and neutralizes harmful battery acid
  • Protects environment and your vehicle
  • Completely safe to handle before and during installation
  • Provides clean finished look with easy installation.
DEI Safety Sleeve (pair)
List Price: $39.99
Our Price: $33.49
Sale Price: $33.49
Savings: $6.50
DEI Pit Crew Safety Kit
List Price: $39.99
Our Price: $34.99
Sale Price: $34.99
Savings: $5.00
DEI Versa Shield Starter Heat Shield
List Price: $49.99
Our Price: $36.99
Sale Price: $36.99
Savings: $13.00
  • Made of Kevlar™
  • Superior cut, slash and heat resistance
  • Thumb-hole sleeve extends past wrists
  • Protects to 900˚F
  • 18" in. in length
  • Available single or in pairs.

Protective eyewear, ear plugs and sleeving. Kit Includes:

Safety Glasses

  • Wrap-around style.
  • 100% UV protection
  • Scratch resistant clear lenses

Ear Plugs

  • Single-size fits all
  • Noise Reduction Rating of 25 dB
  • Attached with a breakaway cord

Safety Sleeve (18”)

  • Made of Kevlar™
  • Superior cut, slash and heat resistance
  • Thumb-hole sleeve extends past wrists
  • Protects to 900˚F

Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000°F.

Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove component when installing Versa-Shield.

  • Withstands 500˚F of direct heat/2000˚ radiant
  • Edges attach to itself with hook & loop closure design
  • Universal-trim length to size
  • Can easily be removed for shows
  • No need to remove starter for installation in most cases
  • Multiple uses to protect master cylinders, cool cans, distributors, fuel pumps & more

Available in 2 sizes:

  • 7” wide x 24” long
  • 5.25” wide x 16.5” long.
DESIGN ENGINEERING Tan Exhaust Wrap 1"x50'
List Price: $49.99
Our Price: $37.49
Sale Price: $37.49
Savings: $12.50
DEI Heat Shroud
List Price: $49.99
Our Price: $39.99
Sale Price: $39.99
Savings: $10.00
DEI Reflect A Gold Heat Reflective Material
List Price: $49.99
Our Price: $39.99
Sale Price: $39.99
Savings: $10.00

Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow.

Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation.

  • Reduce under hood temperatures a realistic 50%
  • Decreases exhaust density & increases exhaust flow
  • Improves horsepower
  • Withstands 1200°F direct/2000°F radiant
  • Only exhaust wrap with installation guide lines.

Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

  • Versatility of fitting diameters ½” to 1-1/4”
  • Convenient hook & loop designed edges
  • Withstands 500°F direct continuous/2000°F radiant heat
  • No need to remove wires and hoses
  • Easily trimed to length
  • Fireproof
  • 1⁄2” to 1-1/4” diameters x 3 foot length

Reflect-A-GOLD is a metalized polyamide polymer laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and remove.

Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.

  • For firewalls, bulkheads, engine covers, floors, seat bottoms & more
  • Capable of handling continual temperatures up to 850°F
  • Resists UV degradation for long-term performance
  • Virtually NO clearance needed
  • Adhesive protected by a release liner rated up to 325°F
  • Light weight and flexible-Trim to size.
DESIGN ENGINEERING TITANIUM EXHAUST WRAP 1"X50'
List Price: $59.99
Our Price: $44.99
Sale Price: $44.99
Savings: $15.00
DEI Titanium Pipe Shield - Exhaust Heat Shield
List Price: $59.99
Our Price: $45.99
Sale Price: $45.99
Savings: $14.00
DEI Motorcycle Fuel Tank Kit
List Price: $59.99
Our Price: $46.99
Sale Price: $46.99
Savings: $13.00

Titanium exhaust wrap, with LR Technology, is made from pulverized lava rock and stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application!

  • Withstands 1800˚F direct/2500˚F intermittent heat
  • Promotes increased flow for improved performance
  • Reduces temperature & vibration breakdown
  • Extremely pliable for a tight and secure wrap
  • DEI HT Silicone Coating not required
  • Pre-wetting roll not necessary for wrapping
  • Hi-tech carbon fiber look
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown.

Extreme heat can rob power and potentially damage engines, transmissions, hoses, and sensitive electrical components. DEI, a market leader in thermal protection, has introduced a revolutionary advancement in pipe shield technology that greatly outperforms Mylar-backed glass fiber shields.

DEI’s Titanium Pipe Shield combines the high heat tolerance of DEI’s proprietary LR fiber technology with a unique rivet-based clamp shield design to improve heat dissipation and cooling. Glass fiber shields can begin to fail at 900°F with the Mylar outer material cracking and flaking off. DEI’s Titanium Pipe Shield provides heat protection up to 1350°F.

LR fiber technology is a two-ply material. The outer layer is made from pulverized and stranded lava rock into a proprietary tightly woven weave for durability and strength. The inside material is made of a special high temperature resistant fabric (89% silica) designed to withstand 350 degrees more heat than glass fiber. This proprietary fiber technology combined with DEI’s unique shield standoff bracket design provides an air gap between the shield and pipe that together provides the maximum potential for cooling and heat dissipation.

With the strategic placement of DEI’s Titanium Pipe Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance. Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, powersports, diesel and industrial applications where heat dissipation and thermal control is needed.

  • Capable of handling high temperature exposure up to 1350° F
  • Protects heat sensitive components, hoses, lines and electrical wiring
  • Easy to install with unique rivet-based pipe standoff brackets and pipe clamps
  • Reduces heat from entering vehicle when placed on exhaust pipes
  • Simple to re-position
The DEI Reflect-A-Cool material is made up of a aluminized reflective foil backed with a base layer of glass fiber. Its rated to withstand continuous temperatures up to 400 Degree Fahrenheit degrees and can reduce fuel temps by up to 30 Percent. Installation is easy, the material can be cut with scissors and lays down well to cover irregular shapes. This kit can be used with all tanks including metal, plastic and fiberglass
DESIGN ENGINEERING Tan Exhaust Wrap 2"x50'
List Price: $69.99
Our Price: $59.99
Sale Price: $59.99
Savings: $10.00
DEI Floor & Tunnel Shield
List Price: $79.99
Our Price: $59.99
Sale Price: $59.99
Savings: $20.00
DESIGN ENGINEERING Black Exhaust Wrap 2"x50'
List Price: $79.99
Our Price: $64.99
Sale Price: $64.99
Savings: $15.00

Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow.

Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation.

  • Reduce under hood temperatures a realistic 50%
  • Decreases exhaust density & increases exhaust flow
  • Improves horsepower
  • Withstands 1200°F direct/2000°F radiant
  • Only exhaust wrap with installation guide lines.
Tired of bubbling paint and scorched plastic on your ATV or motorcycle? DEI has come up with the perfect kit to keep the excess heat from engines and exhausts at bay. A mix of lightweight, flexible materials are included to form a reflective barrier against excess heat. Use the thicker dimpled F&T material around direct heat sources like the exhaust, and the thinner Reflect-A-Cool to shield against radiant heat from the engine. Great for use on fairings, air boxes, seat pans, rear fenders etc. Installation is easy, all materials included can be cut to shape using scissors and form fitted to irregular shapes.

Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow.

Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation.

  • Reduce under hood temperatures a realistic 50%
  • Decreases exhaust density & increases exhaust flow
  • Improves horsepower
  • Withstands 1200°F direct/2000°F radiant
  • Only exhaust wrap with installation guide lines.
DEI Hub & Rotor Kit
List Price: $89.99
Our Price: $79.99
Sale Price: $79.99
Savings: $10.00
CryO2 Purge Kit Single
List Price: $199.99
Our Price: $149.99
Sale Price: $149.99
Savings: $50.00
DEI CryO2 Air Intake
List Price: $219.99
Our Price: $189.99
Sale Price: $189.99
Savings: $30.00

Protection from hot brake drums and rotors

  • Prevents potential of serious burns or cuts
  • Aluminized mylar adhered to fiberglass matting
  • Withstand 2000˚F radiant / 500˚F of direct continuous heat
  • Protection against dirt, dust and airborne particles around track or shop
  • Measures 14" W x 7" D x 13" T.

A purge blast of CO2 will turn heads, command attention and crank up the "wow" factor a few notches. Some suggested mounting locations for a CryO2™ single or dual purge valve include hood scoops, front grille, air vents and fender wells - anywhere inquisitive spectators will be sure to appreciate a new and different "cool" experience.

Each CryO2™ Purge Valve Kit includes everything needed for a simple and straight forward installation:

  • Pre-assembled purge tubes
  • Solenoid valve and fittings
  • Stainless steel braided hose.

The CryO2 patented* Air Intake consists of an aerodynamically designed bulb with a cryogenic chamber which is mounted in a short segment of air tube. Air is cooled as it passes over the bulb, resulting in a cooler, denser, more powerful intake air charge. Testing showed up to a 50°F reduction in intake air temperature.

  • Designed for turbocharged, supercharged, and N/A applications
  • Multiple units increase cooling results
  • Easy installation
  • Large 4 ½” O.D. for Diesel and hi-power applications
  • Complete with silicone coupler, hose clamps, vent cap, and braided line
  • Available in 2-1/2”, 3”, and 4-1/2” O.D.
  • Available in bulb & legs only for custom plumbing.